Detail WJ-RT416 Series ( HDD : Optional)
16CH Real-Time MPEG-4 Digital Disk Recorder supporting 480 ips ( NTSC) / 400 ips ( PAL)
• Equipped with 8 Dual Core Encoders, all 16 cameras can be recorded at 30 ips ( NTSC) / 25 ips ( PAL) per channel.
• MPEG-4: High quality and high compression technology for economical recording.
• Supports multiplexed video and control data over the coax ( 4ch default, additional
4ch by optional board WV-PB4164) and RS-485 camera control ( channel 1 ~ 16) .
• Panasonic camera control: Pan/ Tilt, Zoom, Focus, Iris, Preset Position, Auto mode ( depends
on the camera model) with a system controller, the monitoring software or the web browser* .
• Various recording modes: Manual, Timer, Event ( Pre/ Post)
• Flexible recording/ playback controls: REC, PLAY, Pause, Stop, FF, REW, Prev Record, Next Record
• Various display modes: 4 / 6 / 9 / 16 split screen display ( Live)
• Sixteen alarm inputs and four alarm outputs.
• Synchronized audio recording for 16 channels.
• Direct Search and List Search ( Time & Date, Event Type, Camera number) . • Alarm notification via e-mail.
• Three user levels: Manager, Operator and Viewer
Camera partitioning setting can be applied to each user level.
• Built-in Video Motion Detector: Mask area: 24 x 20, Sensitivity: 01 ~ 99
• Recorded image data can be copied to CD-R, DVD-R, DVD+ R, USB memory ( FAT32) , USB HDD ( FAT32) via COPY interface ( Specified model only) or DVD-R, CD-R via internal DVD drive ( WJ-RT416V) , Viewer software can be included when copying.
• A maximum of 3 TB ( 6x 500 GB, WJ-RT416) or 2.5 TB ( 5x 500 GB, WJ-RT416V) hard disk drives can be installed.
• HDD Safety Mode to protect HDDs during installation.
• Optional WV-CU650 or WV-CU950 system controllers can be connected ( RS-485) . Playback speed can be controlled by Jog/ Shuttle. Direct camera preset position program is also available.
• Integration capability with System150* 2 or System650* : System controllers connected to System150/ 650 can control WJ-RT416. Cameras connected to System150/ 650 can be controlled from the monitoring software ( RT4client) or the web browser* 3.
• Built-in network interfaces ( 10Base-T / 100Base-TX) for remote monitoring and operation.
• Multi-recorder, Multi-site system can be made with the provided
monitoring software ( RT4client) .
• Recorded video and audio data can be downloaded to the client PC
with the monitoring software or the web browser* .
• Up to 16 network clients can monitor live spot images ( total network video stream is 16, Refresh rate depends on the number of streams, recording mode and playback mode) .
• Up to four playback streams can be sent to the network.
• Selectable Unicast/ Multicast for efficient network utilization.
• The viewer software can convert recorded audio and video data into
Windows Media-format, and also can extract audio to wav file.
* Available from version 1.4,
* 2 System150 version 2.2 or later.
* 3 System650 version 3.0 or later.
Tampilkan Lebih Banyak